NO PARKING 24 HOUR ACCESS REQUIRED sign

SIGN CODE: PARK 3

Material selections

The following materials are available for your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign:

• Vinyl: Self-adhesive vinyl plastic (sticky back plastic).
  
  
  • 'Standard' option: For application of your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign to smooth opaque surfaces.
  • 'Mirror image' option: For application of your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign on the inside of window glass, the sign will appear the correct way round when viewed from outside.
    
    
• Plastic: PVC foam board (semi-rigid expanded plastic) in either 3 mm or 5 mm thickness with sign edges appearing white in colour.
• Dibond: A hard rigid plastic sheet laminated on both sides with thin aluminium (overall 3 mm thickness), sign edges appear black in colour.
• Aluminium: Aluminium sheet (2 mm thickness) with sign edges appearing silver in colour.

Note: All 'NO PARKING 24 HOUR ACCESS REQUIRED' signs are over-laminated with a clear vinyl protective layer. This protective layer helps reduce fading due to ultra violet (UV) light exposure from the sun. The layer can also help in making the removal of graffiti from your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign much easier with reduced likelihood of damage to the sign in the process.

Fixing methods

The following fixing methods are available for your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign:

Vinyl signs:

Firstly make sure the fixing surface is smooth, grease free, clean and dry before applying your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign. Peel off the backing material from your self-adhesive vinyl plastic sign. Align and gently fix the 'NO PARKING 24 HOUR ACCESS REQUIRED' sign along the full edge of its longest side holding the remainder of the sign away from the fixing surface. Then, from the fixed edge, rub flat from side to side with a soft cloth gradually moving towards the other side whilst allowing the vinyl to move toward the fixing surface. Take care not to trap any air in your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign as unwanted bubbles will be formed. Air bubbles can usually be removed by popping the plastic surface gently with a sharp pin and then rubbing in a circular motion towards the pin hole to remove unwanted air. Take your time and take great care when applying your 'NO PARKING 24 HOUR ACCESS REQUIRED' sign as once the adhesive makes contact with the surface, the sign will most likely be destroyed if it is removed.

Plastic, aluminium and Dibond signs:

All 'NO PARKING 24 HOUR ACCESS REQUIRED' signs made from these materials can be fixed using suitable adhesives or, if drilled, can be fixed with screws or nails. If you require your sign with pre-drilled fixing holes select the 'with fixing holes' option if not then select the undrilled option. Signs ordered with the fixing holes option will have a 4 mm hole in each corner (i.e. 4 fixing holes in total). Each hole will be placed 12.5 mm (1/2 inch) perpendicular from the sign edges.

View more Parking signs